EICR Schedule of Test Results Template

What is it?

This PDF is two landscape A4 sheets laid out in the column order of the IET model form: the schedule of circuit details and the schedule of test results. It has the board details, a space for the test instrument serial numbers and room for twelve circuits, with matching rows on both sheets. It is the blank schedule only. The report or certificate it belongs to is a separate document, and the readings are the ones you measure.

About this template

The schedule of circuit details records each circuit's wiring, conductor sizes, protective device and RCD. The schedule of test results records the continuity, insulation resistance, polarity, earth fault loop impedance, RCD and AFDD results for the same circuit numbers. Both sit behind an Electrical Installation Condition Report or Certificate, and the person who tested writes their name, signature and date on the results sheet.

When to use

• To record the circuit details and test results for each distribution board or consumer unit when you complete an EICR
• As the schedules that go with an Electrical Installation Certificate for new work
• When you want a printed sheet to write readings on at the board before they are entered anywhere else
• When a board has more circuits than one sheet holds: continue on additional sheets

Tips

1. 1Use the same circuit numbers on both schedules, so each row of results matches its circuit
2. 2Write the maximum permitted Zs for each circuit from the source you used. If it is not from the tabulated values in Chapter 41, state the source in the remarks column
3. 3Use the remarks column to list circuits or equipment vulnerable to damage when testing
4. 4Record the test voltage for each insulation resistance reading, and the instrument it was taken with
5. 5Not every AFDD has a test button. Mark the AFDD column not applicable where there is none
6. 6Use one sheet per board and continue on additional sheets if the board has more circuits