Updated
Exposed Wires In The House
You have found bare or exposed electrical wires in your home — an immediate shock and fire hazard.
Find an electrician
What's happening?
Exposed wires are any electrical cables where the insulation has been damaged, removed, or has degraded, leaving the live metal conductors visible or accessible. This can occur from old age, rodent damage, DIY accidents, or deteriorated insulation. Exposed live wires can cause fatal electric shock on contact and are a major fire risk.
What usually causes it?
- Old cloth or rubber insulation has deteriorated and fallen away
- Rodent damage — mice and rats chew through cable insulation
- Botched DIY work leaving cables unfinished or poorly terminated
- Cables damaged during building work or drilling into walls
- Light fittings or switches removed without properly terminating the wires
Is it dangerous?
Extremely dangerous. Exposed live wires can cause fatal electric shock if touched, and they can arc against nearby surfaces causing a fire. If you find exposed wires, do not touch them. Turn off the circuit at the consumer unit if you can safely identify which MCB controls it. If you are unsure, turn off the main switch. This is a genuine emergency that needs immediate professional attention.
Can I fix it myself?
No. Do not attempt to repair, insulate, or cover exposed wires yourself. Do not wrap them in electrical tape as a permanent fix — this is not safe and does not meet regulations. The only safe action is to isolate the circuit at the consumer unit and call an electrician. Keep children and pets away from the area.
When should you call an electrician?
Call an electrician immediately. Exposed wires are an emergency, especially if they are in an accessible location. If you cannot safely isolate the circuit, or if the exposed wires are near water, call an emergency electrician right away.
What will the electrician actually do?
- Make the area safe by isolating the affected circuit
- Assess the extent of the exposure and underlying cause
- Replace the damaged section of cable or the entire cable run
- Properly terminate any loose wires in appropriate enclosures
- Test the circuit for insulation integrity after the repair
- Recommend further investigation if the cause is rodent damage or systemic insulation failure
What will it cost to fix?
£80–£300
Simple termination and repair at the lower end. If cables need replacing behind walls, costs increase. Emergency callout rates may apply outside business hours.
Find an electricianFrequently asked questions
We’re happy to answer all your questions.
I found exposed wires — what should I do right now?
Do not touch them. Turn off the circuit at the consumer unit, or turn off the main switch if unsure. Keep everyone away from the area and call an electrician immediately.
Can I just tape up exposed wires?
No. Electrical tape is not a safe or regulation-compliant repair. The cable needs to be properly repaired or replaced by a qualified electrician.
Why are there wires hanging out of my wall?
This usually means a light fitting, socket, or switch was removed without the wires being properly terminated. A previous occupant or builder may have left them exposed.
Could exposed wires start a fire?
Yes. Exposed live conductors can arc against other materials, generating intense heat that can ignite surrounding surfaces. This is a serious fire risk.
Need an electrician?
Compare local electricians on Tradehand — coverage areas, accreditations and phone numbers, no middleman.
Find an electrician