
Front Door Lock Frozen
Low risk · Fixed by a locksmith
What's happening?
A frozen lock is water that has crept into the keyway, the cylinder or the multipoint mechanism and turned to ice, so the pins or the bolt cannot move. It happens on cold, damp mornings, usually after rain, a wash of the door or a night of freezing fog, and it is most common on uPVC and composite doors with exposed euro cylinders and on old night latches. The key may refuse to enter, enter but not turn, or turn only with force. Forcing it is the one thing that turns a harmless freeze into a snapped key and a call-out. The ice melts on its own as the day warms, but a door you need to open now and a lock that freezes every winter are two different problems, and the second one points to a worn or wet mechanism.
What usually causes it?
- Rain or condensation that has run into the keyway and frozen overnight
- A cylinder that has worn so far that water collects inside it
- Old oil or grease inside the lock that has thickened or set in the cold
- A door that has dropped or swollen so the bolt is pressing against the keep as well
- A uPVC or composite door multipoint mechanism with seized moving parts
- Condensation inside the lock from a door that is warm indoors and freezing outside
Is it dangerous?
A frozen lock is not dangerous, but the way people thaw it can be. Naked flames near a uPVC or composite door can melt or scorch it, boiling water cracks glass and refreezes in the keyway, and spray lubricants are flammable. The real risk is being unable to leave or get in, so do not force a key that has stopped turning, because a snapped key in a final exit door is a much bigger job.
Can I fix it myself?
1. Do not force the key. If it will not turn, stop and warm it. 2. Use a proper lock de-icer sprayed into the keyway, and give it a minute. 3. Warm the key in your hand or in warm (not boiling) water, dry it, then try again gently. 4. Never use boiling water or a naked flame on the door. 5. Once open, wipe the keyway dry. 6. If it freezes every cold spell, do not keep spraying it: have the cylinder checked, because a worn cylinder holds water.
When should you call a locksmith?
Call a locksmith if the key has snapped or bent, if the lock stays stiff after the ice has gone, if the handle will not lift on a uPVC door, or if you are locked out and the door is the only way in. A lock that freezes repeatedly through winter is worth a visit to look at the cylinder.
What will the locksmith actually do?
- Find out whether the ice is in the keyway, the cylinder or the multipoint mechanism
- Open the door without damage if you are locked out
- Replace a worn or water-logged euro cylinder with a correctly sized one
- Free, service or replace a seized uPVC multipoint mechanism
- Check the door alignment and the keeps, since a binding door adds load to a cold lock
Who fixes this
Questions people ask
How do I unfreeze a front door lock?
Can I use WD-40 on a frozen lock?
Why does my front door lock freeze every winter?
Sources & References
Before you book, read how to check a locksmith is legitimate.



