Skip to main content
Fridge Freezer Tripping the Electrics

Fridge Freezer Tripping the Electrics

When a fridge freezer trips the electrics, the trip is the safety device doing its job: something in the appliance, its cable or the circuit is leaking current, and the food is the urgent part.

Caution · Fixed by an electrician

Updated

What's happening?

A fridge freezer runs around the clock, so a trip that cuts its power can go unnoticed until the food warms up. Electrical Safety First says that if an RCD in the consumer unit keeps tripping there is likely to be a fault, either in a particular appliance or in the wiring, and to get a registered electrician to investigate. The Health and Safety Executive adds that an RCD trip is a sign of a fault and the RCD should never be bypassed. The first job is to find out whether the fridge freezer or the circuit is at fault. If the trip follows the appliance, the fault is in the fridge freezer, its plug or its cable. If the trip happens with the fridge freezer unplugged, it is the circuit or something else on it.

What usually causes it?

  • A fault inside the fridge freezer, which is why the trip follows the appliance when it is plugged in elsewhere
  • A damaged, trapped or worn mains cable, or loose wires at the plug
  • A plug or socket with burn or scorch marks from arcing or overheating
  • An extension lead overloaded by a large appliance, which Electrical Safety First says can cause a fire
  • The appliance used outside or somewhere it can meet the elements, such as a garage or outbuilding in damp conditions
  • A fault elsewhere on the same circuit, which shows when the fridge freezer is unplugged and the trip continues

Is it dangerous?

The trip protects you, so do not bypass or hold the RCD on. Electrical Safety First says arcing or crackling sounds, blown fuses, tripping breakers or a surface too hot to touch mean unplug the appliance and contact the retailer, manufacturer or a qualified repair technician. A fridge freezer left running with a fault can overheat, and Electrical Safety First notes any large appliance carries a fire risk.

Can I fix it myself?

1. Move the food to a working freezer or a cool box with ice packs if you can. 2. Pull the plug and look at the plug, cable and socket for burn marks, cuts, crushing or loose wires, and check the cable is not trapped under the appliance. 3. Reset the breaker with the fridge freezer unplugged. If it trips again with nothing plugged in, the fault is on the circuit, not the fridge freezer. 4. If the breaker holds, plug the fridge freezer into a different socket on a different circuit and see whether the trip follows it. 5. Do not use an extension lead. If the trip follows the appliance, leave it unplugged.

When should you call an electrician?

Call an electrician if the breaker or RCD trips with the fridge freezer unplugged, if the plug or socket is marked by heat, or if the trip repeats on every socket you try. Call a repair engineer or the manufacturer if the trip follows the fridge freezer from socket to socket. Book the same day for any burning smell.

What will the electrician actually do?

  • Isolate the circuit and unplug the appliance, then test the circuit alone for earth leakage
  • Inspect the socket, plug and cable for heat damage, and replace damaged fittings
  • Test the appliance's insulation and earth by portable appliance test where the trip follows it
  • Check the circuit's RCD or RCBO and move or replace it if it is the weak point
  • Advise whether the appliance needs the manufacturer or a repair engineer, and what to do about the food meanwhile

Who fixes this

What it usually costs

Questions people ask

Why does my fridge freezer keep tripping the electrics?

There is likely a fault in the fridge freezer, its plug or cable, or the circuit. Unplug it and reset the breaker: if the trip stops, the appliance is the cause.

Is it safe to reset the RCD and carry on?

Once, to test, yes. The Health and Safety Executive says an RCD trip is a sign of a fault, so check the system before using it again and never bypass the RCD.

Can I use an extension lead for a fridge freezer?

No. Electrical Safety First says to install a fridge freezer close to a wall socket and to avoid an extension lead, because a large appliance can overload one.

Should a fridge freezer have a standard plug?

Yes. Electrical Safety First says fridges and freezers must be fitted with a UK 3-pin plug and fuse.

Sources & References

  1. Electrical Safety First: fridges and freezers
  2. Electrical Safety First: your questions answered
  3. HSE: work using electrically powered equipment

Need an electrician?

Describe the job and get a fixed price from a local electrician.