Updated
Wiring Colours Don't Match
You have found wiring with different colour codes — old red and black mixed with new brown and blue.
What would yours cost?
We'll tell you the price for this, then find a local electrician to do it.
What's happening?
The UK changed its wiring colour codes in 2006. Old wiring uses red (live), black (neutral), and green/yellow (earth). New wiring uses brown (live), blue (neutral), and green/yellow (earth). Many UK homes have a mix of both colour codes where new circuits have been added alongside existing wiring. This is perfectly legal and common, but it can cause confusion and mistakes if not properly identified.
What usually causes it?
- New circuits added to a property that still has pre-2006 wiring
- Partial rewire has replaced some cables but not all
- Extension built with new wiring connected to existing old-colour circuits
- Consumer unit replaced but cables not changed
- DIY work mixing old and new cables without proper identification
Is it dangerous?
The mixed colours themselves are not dangerous — both systems are safe when correctly installed. However, confusion between old and new colour codes can lead to serious mistakes. In the old system, black is neutral; in the new system, blue is neutral. If someone confuses these, they could connect a live wire where neutral should be. This has caused fatal accidents. All mixed-colour installations should have clear warning labels.
Can I fix it myself?
No. You should not attempt to work on wiring with mixed colour codes unless you fully understand both systems. If you are changing a light fitting or socket and find mixed colours, stop and call an electrician. Never guess which wire is which based on colour alone without understanding the context.
When should you call an electrician?
Call an electrician if you find mixed colours and are unsure about any connections, if there are no warning labels on the consumer unit, or if you want to do any work that involves connecting to existing wiring. An electrician will correctly identify all conductors and add appropriate labels.
What will the electrician actually do?
- Identify and label all conductors correctly at the consumer unit and junction boxes
- Apply BS 7671 warning notices where old and new colours coexist
- Check all connections to ensure the correct cores are connected appropriately
- Recommend upgrading old cables if they are deteriorated, regardless of colour
Frequently asked questions
We’re happy to answer all your questions.
Sources & References
Before you book, read how to check an electrician is qualified.
Want the price for your home?
Tell us what's wrong and we'll tell you the price, then find a local electrician to do the job.