Skip to main content
Cooker Switch Not Working

Cooker Switch Not Working

When a hard-wired cooker has no power and its wall switch makes no difference, the fault is the cooker circuit, the switch itself or a connection behind it, and burn marks mean leave it off.

Caution · Fixed by an electrician

Updated

What's happening?

Most electric cookers, hobs and larger ovens are hard-wired to a cooker switch or cooker control unit on the wall, sometimes with a socket built in. The switch is there as a local means of isolation and switching off, and the cooker sits on its own circuit with its own breaker at the consumer unit. Electrical Safety First notes that cookers, ovens and hobs over 2 kW should be on their own dedicated circuit. When the cooker has no power, the question is where the supply stops: the breaker, the switch, or the cooker. A switch that clicks but changes nothing, one with its indicator lamp out, or one with a burnt smell or discoloured plate points to the switch or the connections behind it.

What usually causes it?

  • The cooker's breaker at the consumer unit has tripped and not been reset
  • The cooker switch or cooker control unit has failed internally, so the switch no longer passes power
  • A loose or heat-damaged connection at the cooker switch terminals or behind it
  • A fault inside the cooker, such as an element, that trips the circuit as soon as it is switched on
  • A connection at the cooker's own terminal block or flex that has worked loose
  • A switch or socket fitted too close to the hob, where heat has damaged it over time

Is it dangerous?

A cooker switch that is warm, scorched, buzzing or smells of burning is a fire risk, and Electrical Safety First says arcing sounds, blown fuses, tripping breakers or a surface too hot to touch mean the appliance should be unplugged and checked. Electrical Safety First also lists installing or repairing an electric oven yourself as something to avoid, and says to have it fitted by a qualified electrician.

Can I fix it myself?

1. Check whether the cooker's breaker at the consumer unit has tripped, and reset it once. 2. Look at the cooker switch: is it on, does its indicator light show, does the clock on the cooker come on? 3. If the breaker trips as soon as you switch the cooker on, stop: that is a fault in the cooker or its wiring. 4. Look for brown or black marks on the switch plate, and feel for warmth with the back of your hand. 5. Do not unscrew the switch or the cooker's terminal cover. Switch the cooker off at the wall and book an electrician.

When should you call an electrician?

Call an electrician if the cooker stays dead after one breaker reset, if the breaker trips again, or if the switch shows scorching, warmth or a burning smell. Book the same day for any burning smell. If the cooker works from a standard plug but the circuit trips, an appliance repair engineer may be needed for the cooker itself once the circuit has been tested.

What will the electrician actually do?

  • Isolate the cooker circuit and test where the supply stops: breaker, switch or cooker connection
  • Inspect the cooker switch and its terminals for heat damage and loose connections
  • Replace a failed cooker switch or control unit, and cut back and re-terminate damaged cable ends
  • Test the circuit, including earth continuity and insulation resistance, before reconnecting the cooker
  • Check the circuit is suited to the cooker's rating, and advise if the cooker needs its own dedicated circuit

Who fixes this

What it usually costs

Questions people ask

Why is my electric cooker not working but the breaker is on?

The supply may be stopping at the cooker switch, at a connection behind it or inside the cooker. An electrician tests the circuit step by step to find where it drops out.

Does a cooker need its own circuit?

Electrical Safety First says cookers, ovens and hobs over 2 kW should be on their own dedicated circuit, and that even ovens with a standard plug often need a separate circuit to avoid overloading the kitchen wiring.

Can the cooker switch be in a cupboard next to the cooker?

Electrical Safety First says yes, provided the switch is readily accessible and convenient to use. It also says an accessory fitted at least 100 mm horizontally from the edge of the hob is likely to meet BS 7671.

Is a cooker switch the emergency off for the cooker?

Electrical Safety First says cooker switches and control units are generally provided as a local means of isolation and switching off for maintenance, and the controls on the cooker can normally cut the heat if danger arises.

Sources & References

  1. Electrical Safety First: wiring regulations help
  2. Electrical Safety First: ovens and grills

Need an electrician?

Describe the job and get a fixed price from a local electrician.