Updated
Dimmer Switch Not Working
Your dimmer switch has stopped working — it will not dim the lights, or the light flickers, buzzes, or does not come on at all.
What would yours cost?
We'll tell you the price for this, then find a local electrician to do it.
What's happening?
Dimmer switches use electronic components to regulate the power going to a light, allowing you to adjust brightness. They are more complex than standard switches and have several ways they can fail. Common problems include the dimmer not responding at all, lights flickering at low dim levels, an audible buzzing from the switch or light fitting, or the lights only coming on at full brightness. Many dimmer issues in UK homes are caused by incompatibility between the dimmer and LED bulbs.
What usually causes it?
- LED bulbs incompatible with the type of dimmer installed (leading-edge vs trailing-edge)
- Dimmer switch rated for a higher minimum load than the LED bulbs provide
- Failed electronic components inside the dimmer module
- Loose wiring connections behind the dimmer faceplate
- Mixed bulb types on the same dimmer circuit (different brands or wattages)
Is it dangerous?
A non-working dimmer is generally low risk. However, if the dimmer is hot to the touch, produces a burning smell, or makes a loud buzzing or crackling sound, it may have an internal short and should be turned off at the consumer unit. Normal gentle warmth from a dimmer is acceptable — they naturally run slightly warm.
Can I fix it myself?
If the dimmer started playing up after changing to LED bulbs, compatibility is the most likely issue. Check that your dimmer is LED-compatible (sometimes marked as 'trailing edge' or 'LED'). Try different LED bulbs rated as dimmable — not all LED bulbs are dimmable and compatibility varies between brands. Ensure all bulbs on the circuit are the same type and wattage. Check the dimmer's minimum load rating — if your LED bulbs draw less than the minimum, the dimmer cannot regulate them properly.
When should you call an electrician?
Call an electrician if changing bulbs does not resolve flickering or buzzing, if the dimmer needs replacing with an LED-compatible model, if the dimmer is part of a two-way arrangement, or if it is producing heat or a burning smell.
What will the electrician actually do?
- Test the existing dimmer and identify the type (leading-edge or trailing-edge)
- Check compatibility with the installed LED bulbs
- Replace the dimmer with a suitable LED-compatible trailing-edge model
- Ensure the wiring is correct, especially for two-way dimming circuits
- Test the new dimmer across the full range to confirm smooth operation
Frequently asked questions
We’re happy to answer all your questions.
Sources & References
Related costs
Before you book, read how to check an electrician is qualified.
Want the price for your home?
Tell us what's wrong and we'll tell you the price, then find a local electrician to do the job.