
Cracked Glass Splashback Or Table Top
Caution · Fixed by a glazier
What's happening?
Glass splashbacks and table tops are usually toughened, which is why they are strong and why a damaged one cannot be repaired. Pilkington explains that toughened glass is made from panes already cut to final size with finished edges, and that if a crack reaches the tensioned centre of the pane it breaks into small granular pieces. Everest adds that cutting or grinding after toughening breaks the glass, so a replacement has to be made to measure. Pilkington also says edge damage from handling can cause a fracture later, and that an impact can leave the object some distance from the broken glass, which is why breaks look spontaneous. The only fix is a replacement made to size: measure the existing glass, note the edge finish, holes and thickness, and order new glass. Until then a cracked top should not be used, and a cracked splashback behind a hob should be taken down.
What usually causes it?
- An edge chip from handling or fitting that later grew into a crack
- An impact from a knock or dropped object that was not noticed at the time
- A nickel sulphide inclusion in the glass, which Pilkington says has been known to make toughened glass shatter
- A load on a table top or shelf that it was not made to take
- A fixing or support that puts uneven stress on the pane or its edge
Is it dangerous?
A cracked toughened pane can break into granules without warning, and a cracked splashback behind a hob can fail near hot pans. Stop using a cracked table top, cover it, and keep children away. Take a cracked splashback behind a hob off the wall rather than cooking in front of it.
Can I fix it myself?
1. Stop using the cracked table or cooking at the cracked splashback. 2. Cover a table top with a cloth and keep people from leaning on it. 3. Photograph the crack and the edges. 4. Measure the pane: width, height, thickness, corner shape and the positions of any holes. 5. Do not try to glue or tape a toughened pane back together. 6. Wear gloves and eye protection if you have to clear it.
When should you call a glazier?
Call a glazier for any cracked splashback, table top, shelf or glass panel, and straight away if it is above a hob or in a place where people sit or lean. They can measure, template and replace it, and fit new safety glass where it is needed.
What will the glazier actually do?
- Remove the cracked or shattered glass safely and clear the fragments
- Template the opening and record thickness, edge finish and cut-outs
- Order made-to-measure toughened glass, as the pane cannot be cut after toughening
- Fit the new panel with fixings and support that do not stress the glass or its edges
- Check the fixings and support for what caused the failure, so it does not repeat
Who fixes this
- Splashback and mirror glass
- Toughened and safety glass
Questions people ask
Can a cracked glass splashback be repaired?
Why did my glass splashback crack by itself?
Can a glass table top be replaced without buying a new table?
Sources & References
Before you book, read how to check a tradesman is legit.


