Updated
Smoke Coming From A Socket
You can see smoke coming from a plug socket — this is a fire emergency.
Find an electrician
What's happening?
Visible smoke from a socket means materials inside or behind the socket are burning or smouldering. This is an active fire event or the immediate precursor to one. Smoke from a socket can be caused by arcing igniting dust and debris inside the back box, melting cable insulation, or the socket plastic itself burning. This requires immediate action.
What usually causes it?
- Sustained arcing inside the socket igniting dust, debris, or insulation
- Cable insulation melting and smouldering from overheated connections
- Socket plastic itself burning from internal overheating
- Short circuit behind the socket causing flash heating
- Moisture ingress causing tracking and arcing across the socket face
- Vermin damage to cables behind the socket causing exposed conductors to arc
Is it dangerous?
This is an extreme emergency. Smoke means combustion is occurring. Turn off the main switch at the consumer unit if it is safe to do so. Do not put water on an electrical socket. If the smoke is significant, the socket is visibly burning, or you cannot safely reach the consumer unit, evacuate immediately and call 999. After the fire service has confirmed it is safe, call an electrician to repair the installation.
Can I fix it myself?
No. This is an emergency requiring professional help. Your priorities are: 1) Turn off the main switch if safely accessible. 2) Do not use water. 3) If you have a dry powder or CO2 fire extinguisher, you can use it on an electrical fire if trained to do so. 4) If in any doubt, evacuate and call 999.
When should you call an electrician?
Call an emergency electrician after the immediate danger has been addressed. If the fire service attended, they will advise when it is safe for an electrician to work. The electrician must inspect and repair the damage before any power is restored to the property.
What will the electrician actually do?
- Assess the extent of fire and heat damage to the electrical installation
- Replace the damaged socket, back box, and any heat-damaged cabling
- Inspect adjacent circuits and sockets for damage from heat or smoke
- Test the entire installation (or affected circuits) for integrity
- Issue an Electrical Installation Certificate or Minor Works Certificate
- Recommend an EICR for the full property if the installation's condition is in question
What will it cost to fix?
£150–£500
Costs depend heavily on the extent of damage. A single socket replacement is cheaper, but fire damage often affects more of the installation. Emergency callout rates apply.
Find an electricianFrequently asked questions
We’re happy to answer all your questions.
What should I do if smoke comes from a socket?
Turn off the main switch if safely accessible. Do not use water on it. If the smoke is heavy or you see flames, evacuate and call 999 immediately. After the situation is safe, call an emergency electrician.
Can I use a fire extinguisher on a socket fire?
Only a dry powder or CO2 extinguisher should be used on electrical fires. Never use water or foam on an electrical fire. If you are not trained or confident, evacuate and let the fire service handle it.
Will my insurance cover this?
Most home insurance policies cover accidental fire damage including electrical fires. Document the damage with photographs before cleanup. Your electrician can provide a report describing the fault and repairs.
How do I prevent socket fires?
Regular electrical inspections (EICR every 10 years), not overloading sockets, using quality appliances and plugs, and paying attention to warning signs (warmth, buzzing, burning smell) all reduce the risk.
Need an electrician?
Compare local electricians on Tradehand — coverage areas, accreditations and phone numbers, no middleman.
Find an electrician