
Cracked Shower Tray
Caution · Fixed by a bathroom fitter
What's happening?
A cracked shower tray stops being watertight, so water gets under it into the floor and ceiling below. Crosswater's guidance says minor surface marks can be repaired, but cracks or holes require tray replacement to maintain watertight integrity. Visible cracks, soft spots, leaks through the tray surface, or flexing that gets worse over time are the signs to act on. The first step is to clean and dry the area to judge how deep the crack goes. Hairline cracks can be repaired by a specialist repair company, deep cracks or leaks mean removing and replacing the tray, and the supporting base should be inspected to prevent repeat damage. General resin repair kits should not be used unless they are specified for your tray's material, such as stone resin or acrylic.
What usually causes it?
- Flexing because the tray has no proper support underneath, such as missing legs, bearers or a bed
- Impact damage, such as a dropped bottle or heavy object on the surface
- A tray with an uneven or settling base that stresses the material
- Heavy use that gradually opens a crack at a stress point, such as near the waste
- A previous poor repair that has failed
- Movement in the floor beneath the tray
Is it dangerous?
A cracked tray is a slow-leak risk: water gets under the tray and into the floor, which can rot timber and show as damp patches on the ceiling below. A tray that flexes underfoot is also a slip and injury risk. Stop using the shower if the crack is through the surface or the tray moves.
Can I fix it myself?
1. Stop using the shower if the crack goes through the tray or you can see it leaking. 2. Clean and dry the area to see how deep the crack is. 3. Take a photo of the crack with a bottle or coin beside it for scale, and one of the whole tray with the front panel off if it has one. 4. Do not fill it with a general resin kit unless the product is made for your tray's material. 5. Contact the maker or retailer if the tray is under guarantee, then get a fitter or plumber to inspect and replace it.
When should you call a bathroom fitter?
Call a bathroom fitter if the crack is deep, through the surface or leaking, if the tray flexes or has soft spots, or if the ceiling below shows damp. A hairline crack on the surface may be worth a specialist repair, but the fitter should still check the support underneath.
What will the bathroom fitter actually do?
- Dry and assess the crack's depth, and check the tray's material and guarantee
- Remove the enclosure, seals and waste as needed, and take out the tray
- Inspect and repair the supporting base, legs or bed so the tray is level and fully supported
- Fit the new tray, connect the waste and seal the edges
- Test for leaks before the shower is used and reinstate the enclosure
Who fixes this
- Shower installation
- Full bathroom fitting
What it usually costs
- Shower Installation Cost
- £300–£600 for an 8.5kW electric shower
Questions people ask
Can a cracked shower tray be repaired?
Is it safe to keep using a cracked tray?
Can I use a general repair kit?
What does the manufacturer need if the tray is under guarantee?
Sources & References
Before you book, read how to check a tradesman is legit.


