Updated
Burglar Alarm Beeping
Your burglar alarm keypad or panel is making a constant or intermittent beeping sound.
What's happening?
A beeping alarm panel is alerting you to a fault or condition that needs attention. Unlike a full alarm activation (which triggers the sounder), a beeping panel is a lower-level warning. The type and frequency of beeping usually indicates what the fault is.
What usually causes it?
- Low backup battery — the most common cause of alarm beeping
- Mains power failure to the alarm panel
- Sensor tamper fault — a sensor cover is loose or has been knocked
- Communication fault (on monitored systems)
- Zone fault — a sensor is not responding
- System needs servicing — annual service reminder
Is it dangerous?
Alarm beeping is not a safety risk. It is an annoyance that indicates a fault requiring attention. If the beeping is due to a mains power failure, check your general electricity supply as well.
Can I fix it myself?
Check the keypad display for a fault message or code and consult your alarm manual. If it shows a battery fault, the backup battery needs replacing. If it shows a mains fault, check the fused spur supplying the alarm panel. Some panels allow you to silence the beep temporarily using an engineer code or by pressing a specific button — check the manual.
When should you call an electrician?
Call an electrician or alarm specialist if you cannot silence the beeping, if the fault code is not in your manual, if the beeping started after a power cut and has not cleared, or if you need the backup battery replaced.
What will the electrician actually do?
- Read the fault codes from the alarm panel
- Diagnose the cause of the beeping
- Replace the backup battery if needed
- Check and repair the mains supply to the panel
- Clear the fault and test the system
Frequently asked questions
We’re happy to answer all your questions.
Sources & References
Before you book, read how to check an electrician is qualified.
Want the price for your home?
Tell us what's wrong and we'll tell you the price, then find a local electrician to do the job.





