Skip to main content
Bubbles in a Plastered Wall

Bubbles in a Plastered Wall

Bubbles on a plastered wall are almost always moisture trapped under the paint or a powdery, dirty surface, and if they return the wall is damp or the plaster is not bonded.

Low risk · Fixed by a plasterer

Updated

What's happening?

Bubbles that rise on a plastered wall, often within days of painting, are a blistering fault in the paint film over the plaster. Dulux lists the causes: moisture trapped beneath the paint film, paint applied over a powdery or friable surface, contamination such as dirt, oil and grease, polish residues that stop the paint sticking, and excessive movement of the surface underneath. New plaster holds a lot of water. Dulux says new plaster should dry for at least one to two weeks before its damp seal primer goes on, and that damp must always be treated at source. When the wall is thoroughly dry, the bubbles are rubbed down with wet and dry abrasive paper, rinsed, left to dry and repainted. If they keep coming back, the wall is not dry or something is feeding it water.

What usually causes it?

  • Painting new plaster before it has dried, so moisture is trapped beneath the paint film
  • Paint applied over a powdery or friable plaster surface that does not hold it
  • A dirty, greasy or polished surface that stops the paint bonding
  • Condensation or a leak feeding moisture into the wall behind the plaster
  • Excessive movement of the plaster or joints beneath the paint, which stresses the film
  • A damp seal or primer put on before new plaster has dried for the one to two weeks Dulux advises

Is it dangerous?

Bubbles are not dangerous, but they are a symptom. If the wall is damp, the source needs fixing, because Dulux says its damp seal products are not a cure for damp and do not suit areas with efflorescent salts or condensation problems. Soft, crumbling or stained plaster behind a bubble is a sign to stop repainting and find the water.

Can I fix it myself?

1. Press a bubble and feel the wall: is it cold and damp, or dry and powdery? 2. Pop one bubble and look underneath: wet plaster means moisture, powder means a friable surface. 3. If the wall is new, leave it to dry fully, with windows open and heating gentle. 4. Once the wall is dry, rub down the blisters with wet and dry paper and a little detergent, rinse, let it dry, and repaint. 5. If bubbles return, look for a leak or condensation and ask a plasterer whether the plaster is bonded.

When should you call a plasterer?

Call a plasterer if the bubbles return after repainting, if the plaster sounds hollow or crumbles, or if it is soft or stained behind the bubble. Look for the moisture source first if the wall is old, since a plasterer cannot fix plaster that keeps being wetted.

What will the plasterer actually do?

  • Tap and test the wall to find whether the plaster has lost its bond with the background
  • Cut out and re-plaster loose or blistered areas rather than painting over them
  • Check for signs of damp, and send you to the right trade first where there is a leak or condensation
  • Prime a friable or very absorbent surface so paint will hold
  • Leave the new plaster to dry before it is decorated, and tell you how long that takes

Who fixes this

  • Wall and ceiling repairs
  • Skimming and re-skimming

Questions people ask

Why is my paint bubbling on new plaster?

Dulux says blistering can be due to moisture trapped beneath the paint film, so the usual reason is painting plaster that has not dried. New plaster needs to dry for at least one to two weeks before a damp seal primer is used.

How do I fix bubbles in painted plaster?

Dulux says to rub them down with wet and dry abrasive paper using water with a little detergent, rinse, let the wall dry, and repaint.

Do bubbles mean the wall is damp?

They can. Moisture trapped beneath the paint film is one of the causes Dulux lists, and it says damp should be treated at source.

Can I paint a damp seal over the bubbles?

Dulux says its damp seal product is not a cure for damp, which should be treated at source, and it should not be used where efflorescent salts are present or condensation is a problem.

Sources & References

  1. Dulux: 15 paint problems and how to fix them
  2. Dulux: damp seal primer and undercoat

Need a plasterer?

Describe the job and get a fixed price from a local plasterer.