
Decking Boards Warped, Cupped Or Splitting
Low risk · Fixed by a landscaper
What's happening?
Timber moves as it takes in and loses moisture, and decking boards sit outdoors in the wet and the sun. A board warps when one face dries faster than the other, cups when its edges lift, and splits when the fixing or the drying pulls the grain apart. Much of this comes from how the deck was laid: screws too close to the board end or edge, boards laid with no gap, joists too far apart or uneven, or a deck with poor drainage and airflow underneath. The TDCA recommends deck screws positioned a quarter of the way in from the edges and 25 mm from board ends, pre-drilled to prevent splitting, and says fixings should allow boards to be adjusted as the timber moves. Boards that have warped often cannot be flattened and are replaced.
What usually causes it?
- Screws placed too close to the board end or edge, splitting the timber
- Fixings not pre-drilled, especially at board ends and in hardwood
- Boards laid with no gap, so they swell and push against each other
- Joists uneven or too far apart, so boards flex and twist
- Damp trapped under the deck with no airflow, wetting one face more than the other
- Timber that was wet or poorly seasoned when it was laid
Is it dangerous?
A warped board is a trip hazard, and a split board can lift into splinters or give way underfoot. Check any board that moves or feels spongy: soft decking can mean rot underneath.
Can I fix it myself?
1. Walk the deck and mark boards that are lifting, loose or split. 2. Check the fixings: screws proud of the board or missing should be re-set or replaced with corrosion-resistant deck screws. 3. Do not force a cupped board down with long screws near the edge. 4. Check underneath for damp, blocked airflow and soft joists. 5. Replace boards that are badly warped or split rather than trying to flatten them.
When should you call a landscaper?
Call a landscaper or decking installer if many boards have warped, if the deck feels soft or springy, if the joists look damp or rotten, or if the deck needs relaying with proper gaps and fixings.
What will the landscaper actually do?
- Inspect the boards, the fixings and the joists underneath for damp and rot
- Replace warped or split boards with timber of the right grade and moisture content
- Re-fix boards with corrosion-resistant screws, pre-drilled, at the right positions
- Re-space the boards, and correct uneven or widely spaced joists
- Improve drainage and airflow under the deck so it dries evenly
Who fixes this
Questions people ask
Why are my decking boards warping?
How should decking boards be screwed down?
Can warped decking boards be straightened?
Sources & References
Before you book, read how to check a tradesman is legit.


