Skip to main content
Gap Between Architrave And Wall

Gap Between Architrave And Wall

A visible gap runs between the door architrave and the wall or the frame, often after plastering, painting or a new door lining.

Low risk · Fixed by a carpenter

Updated

What's happening?

Architrave is the moulding that covers the joint between a door lining and the wall. A gap behind or beside it means the joint has opened or was never closed properly, and the size and cause of the gap decide the fix. A gap of a few millimetres is often a flexible filler or caulk job. A larger gap, or one that varies along the architrave, usually means the door lining is standing proud of the plaster or the wall is uneven, and filler alone will crack. Movement is the other cause: a frame that flexes, a door that is slammed or a house that has dried and shrunk will open a rigid filler again. Where the lining stands proud, a plasterer may need to build the plaster up, or the architrave may need to be refitted to a packed lining.

What usually causes it?

  • The door lining standing proud of the finished plaster, so the architrave cannot sit flat
  • An uneven plaster or wall surface behind the architrave
  • A rigid filler that has cracked because the frame or wall moves
  • A new house or new plaster drying and shrinking after the architrave was fitted
  • Architrave pinned to a lining that has bowed or moved
  • A slammed door or heavy use flexing the frame and opening the joint

Is it dangerous?

No. It is cosmetic, though a gap that follows a crack in the wall may be part of wider movement. If the gap is part of a diagonal crack or widens, have the wall looked at.

Can I fix it myself?

1. Measure the gap: a few millimetres or more. 2. For small gaps, use a flexible decorators' caulk, pushed in and smoothed, and paint over it. 3. Do not use rigid filler where the frame moves. 4. For larger gaps, fill in layers and let each dry, or use a thin packing strip, then caulk. 5. If the gap is large or uneven, the problem is the lining or the plaster, and filler will not hold.

When should you call a carpenter?

Call a carpenter if the gap is large, varies along the architrave, keeps reopening or comes with a crack in the wall. A carpenter can refit the architrave to a packed lining, and a plasterer can deal with the wall if the plaster is the problem.

What will the carpenter actually do?

  • Check whether the gap comes from the lining, the plaster or movement
  • Remove and refit the architrave on packing so it sits flat to the wall
  • Pack and fix the door lining if it has bowed or moved
  • Fill and caulk the joint with a flexible product suited to the movement
  • Refer a plaster build-up or a wall crack to a plasterer or builder

Who fixes this

  • Skirting and architrave

Questions people ask

How do you fill a gap between architrave and wall?

A small gap takes flexible decorators' caulk. A larger gap needs a thin strip or filling in layers, and if the lining sticks out of the plaster the architrave may need refitting.

Why is there a gap behind my architrave?

Often the door lining stands proud of the plaster, or the wall is uneven. Movement or shrinkage after fitting can also open the joint.

Should I use filler or caulk?

Caulk, where the joint moves, because rigid filler cracks. Toolstation calls decorators' caulk the ideal product for gaps between the wall and the architrave, and Jewson suggests caulk for gaps under 5 mm.

Sources & References

  1. Wickes: How to fit architrave
  2. Toolstation: How to install architrave
  3. Jewson: How to fit skirting boards and architraves

Need a carpenter?

Describe the job and get a fixed price from a local carpenter.